教师风采

当前位置: 首页> 教师风采>

姓名:杨宇星

性别:

职称:讲师

办公地点:综合楼516

学位:工学博士

电子邮箱:yangyuxing@dlmu.edu.cn

教育经历:

2010年9月—2014年7月大连理工大学机械工程学院机械设计制造及其自动化专业工学学士

2014年9月—2019年9月大连理工大学机械工程学院机械制造及其自动化专业工学博士

工作经历:

2019年9月—至今大连海事大学轮机工程学院讲师

2020年1月—至今 大连海事大学船舶与海洋工程博士后

研究方向:

船用复材螺旋桨制造,船用复合材料力学性能研究,深海工程装备连接质量研究,有限元仿真分析

教学情况:

船舶及海上设施检验、轮机工程英语

代表性成果:

1.Yuxing Yang, Xueshu Liu, Yi-Qi Wang, Hang Gao, Rupeng Li, Yongjie Bao. A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending. Composites Science and Technology, 2017, 151: 85-93. [SCI IF: 7.094]

2. Yang Y, Liu X, Wang Y Q, et al. An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming. Composite Structures, 2018, 187: 18-26. [SCI IF: 5.138]

3. Yang Y., Wang Y.-Q., Liu X., Gao H., Bao Y. The effect of shimming material on flexural behavior for composite joints with assembly gap. Composite Structures, 2019, 209:375-382. [SCI IF: 5.138]

4. Xueshu Liu, Yuxing Yang, Li Huang, Ping Zhang, and Hang Gao. Numerical Analysis of the Influences of Geometrical Deviation on Delamination in Composite Laminates around the Countersunk Hole. International Journal of Aerospace Engineering, vol. 2018, Article ID 5061948, 11 pages, 2018. doi:10.1155/2018/5061948.[SCI]

5. Xueshu Liu, Yuxing Yang, Yiqi Wang, Yongjie Bao, and Hang Gao. Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints. International Journal of Polymer Science, vol. 2017, Article ID 2790198, 11 pages, 2017. doi:10.1155/2017/2790198.[SCI]

6.Xueshu Liu, Junhao Chang, Yuxing Yang, Yiqi Wang, Yongjie Bao, and Hang Gao. Evaluation of Assembly Gap from 3D Laser Measurements via FEA Simulation. International Journal of Aerospace Engineering, vol. 2018, Article ID 4303105, 7 pages, 2018. https://doi.org/10.1155/2018/4303105. [SCI]

7. Xueshu Liu, Yuxing Yang, Hang Gao, Yongjie Bao, Rupeng Li, Lei Chen. Effects of Hole-Perpendicularity Error on Joint Stiffness of Single-Lap Double-Bolt Composite Joints. Engineering Transactions, 2017, 65 (2): 289-305. [EI]

8.高航,王建,杨宇星,刘学术,陈磊,李汝鹏.垂直度误差对复合材料单钉连接性能的影响.航空学报, 2017, 38(2):285-293. [EI]

9.刘学术,杨宇星,鲍永杰,高航,李汝鹏.垂直度误差影响复合材料层合板层间应力分析[J].机械科学与技术,2018,37(01):138-147.

10. Chang J, Yang Y, Liu X, et al. A mixed shimming method in eliminating the gaps during the assembly process of the complex structures[C]//IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2019, 493(1): 012140.

在研项目:

1、博士后面上项目“淹没态耐蚀船用复材桨形性协同制造及其质量调控原理”[负责]

2、中央高校基本科研业务费青年教师科技创新项目“多激励下船用复合材料桨-轴服役健康预报方法”[负责]

3、国家重点研发计划“制造基础技术与关键部件”专项“阀口独立控制型大流量液压阀关键技术研究与示范应用”[参与]

学术兼职:

机械工程学会高级会员

关闭窗口